Steel Making Lifting Electromagnetic Suckers
Hoisting electromagnet and electromagnetism lifting electromagnet, mainly used in metallurgy, mining, machinery, transportation and other industries, such as steel and other magnetic materials. Also used as electromagnetic manipulator, holding steel and other magnetic materials, suitable for...
Hoisting electromagnet and electromagnetism lifting electromagnet, mainly used in metallurgy, mining, machinery,transportation and other industries,such as steel and other magnetic materials.
Also used as electromagnetic manipulator,holding steel and other magnetic materials,suitable for handling cast iron ingots,steel balls and various scrap steel.
Its excitation mode can be adopted:the fixed voltage mode,the strong excitation mode and the overexcitation mode.
1.Fully enclosed structure with good moisture resistance.
2.Optimized design by computer,reasonable structure,heavy weight ratio and low energy consumption.
3.The excitation coil is processed by special process, which improves the electrical and mechanical properties of the coil,and the insulation material has a grade C of heat resistance,and the service life is long.
4.Different structures and parameters are adopted to meet the needs of users.
5,high temperature type electromagnet USES the unique way of heat insulation,the sucked material temperature from 600℃to 700℃,expanding the applicable scope of the electromagnet.
6.Simple installation,operation and maintenance.
Real picture show
Select the type of attention editor
1.suction material when the temperature is below 100 ℃,use normal type,more than 100 ℃,use high temperature type.
Please noted when more than 600 ℃.
2.Please choose high frequency if the continuous current rate is over 60%.
3.When lifting materials in water,please choose the diving type (diving depth is less than 100 meters),and the parameters of the submersible electromagnet are the same as the normal temperature type.
If the user needs to dive,please indicate when ordering.
When using single stage,select the rectifier control equipment and auxiliary equipment according to the consumption power (current),and choose the combined power (current) of the power (current) according to the number of the unit.
Use note editing
1.Before use,check whether there is any damage to the components of the electromagnetic sucker, and replace it with time.
2.Pay attention to the surroundings before lifting, and do not pass the equipment and personnel.
3.Check whether the rated current is reached before lifting.
4.Before lifting the crane, check whether there is any non-conductive magnetic material between the lifting and lifting electromagnetic sucker, so as to avoid affecting the hoisting height.
5.Hoisting electromagnetic suckers must be placed on top of the object being sucked, and then energized to avoid small iron cutting.
6.Make sure to observe the surrounding environment and pay attention to safety when landing.