CXTS European Standard Manufacturing Lifting Double Girder Wire Rope Hoist Cranes
I. Specification 1. Capacity: 1ton-80ton 2. Span: 6m-31.5m 3. Work duty: FEM2M, M5 4. Protection class: IP55; Insulation class: F; Continuing rate: 60% ( for the high class motor) 5. Cooling rate: 30% than normal crane 6. Over temperature protection: 170℃ II. Brief introduction European type...
1. Capacity: 1ton-80ton
2. Span: 6m-31.5m
3. Work duty: FEM2M, M5
4. Protection class: IP55; Insulation class: F; Continuing rate: 60% ( for the high class motor)
5. Cooling rate: 30% than normal crane
6. Over temperature protection: 170℃
II. Brief introduction
European type cranes have such design concepts as small dimension, light dead weight. Compared with traditional cranes, the limiting distance is minimum from hook to wall, and headroom is the lowest, which makes cranes work more close to the front, and lifting height more higher that increases effective working space of workplace.
The lifting trolley uses KONE crane brand SWF trolley to make sure the quality best. The configurations are very advanced, such as Schneider electrical, ABM/Nord / SEW triple gear motor (three in one: motor, gear box, brake), galvanized high strength wire rope, self-adjusted disk brake, hard tooth reducer, programmable lifting limit switch, and so on.
III. Crane features
1. High security
1)The safety supervises system equipped with overload limiter, and on the monitor it can display the loads value, it can remind the operator to prevent the overload.
2)Before the start, the entire controller will start self checking, includes: power voltage, default phase, the effective of each safety protective device and zero position of the button.
2. High reliability
1)Imported motor, the insulation grade is F, and protective grade is IP54, it shall also have over heated and alarming function, the motor cover adopts aluminum alloy to drawing the molding, with better heat dissipation.
2)Germany imported reducer, harden face gear, improve the bearing ability, better sealing of the shell, ensure there no grease penetration.
3)The main electric elements adopts the international brands include Schneider, Siemens, ABB. The protective grade of the electric control box shall no less than IP 54.
4)The wheel forged by 65Mn alloy steel, with the performance of abrasive resistance, ant fatigue and long service life.
3. Low-energy and maintenance-free
1) The total power of crane reduce about 30%, energy conservation and environmental protection.
2) The multi -in-one integrated transmission mechanism has less intermediate ring knot and high transmission efficiency.
3) Adopt frequency control, high and low speed ratio 1:10, work efficiency increased by more than 20%.
4) The "Maintenance-free and easy maintenance"design concept reduces customer maintenance costs.
5) It uses advanced processing technology and high - quality imported components. Its failure rate has been greatly reduced compared to traditional GB crane, helping customers reduce operating costs.
IV. Control methods for us to choose:
A. Easy operation when observation.
Wireless remote control
A. Greatly improved the work efficiency.
Cabin operation control
A. High grade steel plate adapted for cabin structure
V. Technical parameter
Max. wheel load
Kindly please provide the following information when sending enquiry to us.
1. Lifting capacity ______ton
2. Span _______meters (it is center to center distance between railways)
3. Lifting height ______meters (it is the distance from center of hook to floor)
4. Travelling length _____meters
5. Industrial voltage _____V, _____HZ, 3Phases
6. Control mode
A. Pendant control B. Remote control C. Cabin control
7. Do you also need us to supply rail and bus bar?
A. Yes B. No
8. What is the main lifting material?
- Previous: CXSM Double Beam Open Winch Electric Overhead Crane with European Style Design
- Next: CXSM European Winch Hoisting Trolley Double Beam Overhead Bridge Crane 20 Ton 25 ton 30 Ton 35 ton 40 Ton