European Double Beam Overhead Crane Trolley System with Hoist

I. Overview European type cranes have such design concepts as small dimension, light dead weight. Compared with traditional cranes, the limiting distance is minimum from hook to wall, and headroom is the lowest, which makes cranes work more close to the front, and lifting height more higher that...

Chat Now

Product Details

European-Double-Beam-Overhead-Crane-Trolley-System-with-Hoist_1.jpg

I. Overview

European type cranes have such design concepts as small dimension, light dead weight. Compared with traditional cranes, the limiting distance is minimum from hook to wall, and  headroom is the lowest, which makes cranes work more close to the front, and lifting height more higher that increases effective working space of workplace.
The lifting trolley uses Konecrane brand SWF trolley to make sure the quality best. The configurations are very advanced, such as Schneider electricals, ABM/Nord / SEW triple gear motor (three in one: motor, gear box, brake), galvanized high strength wire rope, self-adjusted disk brake, hard tooth reducer, programmable lifting limit switch, and so on.


II. Specification

Capacity1ton-20ton  
Span6m-31.5m    
work dutyFEM2M, M5
Protection classIP55
Insulation classF
continuing rate60% ( for the high class motor)
Cooling rate30% than normal crane
Over temperature protection170ºC
Working temperature-25 to +42 centigrade


III. Three control methods

1Pendent control

A. Easy operation when obervation

B. Convenient to communication with other workers.

2Wireless remote control

A. Greatly improved the work efficiency

B. Keep the operator from danger.

3Cabin room control


IV. Features


 1. In gereral

1) Optimazed designing, DIN/FEM standard, smaller wheel load, space saving.

2) Max. Safe working load 80T.

3) Flexible solution for all lifting needs

4) Excellent driving properties, stepless control, smoothly moving.


2. Electrification and outfitting:

1) Conduct power supply.

2) Phase control guard opens the main contactor in case of phase failure.

3) The flat cables used for festoons are PVC insulated flexible flat cables rated for 450/750V, specially designed for cranes, hoists.

4) Clean and smooth flat cable power supply system.                              

5) Cables are coded either with numbers, colours or tags for easy identification.

6) All hoist and crane movements are independent and can be run simultaneously.

7) The control panels are finished to withstand corrosion, IP55.

8) The components are positioned in a maintenance friendly way, and the whole layout provides good protection against accidental contact.

9) The multi-wire type fixed cables with plastic insulation are intended for crane usage.


3. High Security

1) The safety supervises system equipped with overload limiter, and on the monitor it can display the loads value, it can remind the operator to prevent the overload.
2) Before the start, the entire controller will start self checking, includes: power voltage, default phase, the effective of each safety protective device and zero position of the button.

V. Packaging and Delivery 


 

23_2.jpg 


2_1.jpg

Hot Tags: European double beam overhead crane trolley system with hoist, China, factory, manufacturers, suppliers, made in China
Related Products

Inquiry