QE Type 5+5T~50+50T Double Trolley Lifting Cab Control EOT Crane

QE type 5+5t~50+50t Double Trolley Lifting Cab Control EOT Crane Double trolley lifting crane introduction: QE MODEL crane has two trolleys, two trolleys can be used at the same time, can also be used separately. Applicable to factories and mines in the workshop or open-air warehouse hanging...

Chat Now

Product Details

QE type 5+5t~50+50t Double Trolley Lifting Cab Control EOT Crane
Double trolley lifting crane introduction:
QE MODEL crane has two trolleys, two trolleys can be used at the same time, can also be used separately. Applicable to factories and mines in the workshop or open-air warehouse hanging long pieces of materials.

1499256489(1).jpg


Cab control EOT crane machine:
This series of dual-trolley crane with GB / T3811 "crane design specifications" and GB14405 "general bridge crane" requirements for industrial and mining workshop or open storage of long items (such as wind power tower, pipe, Mold, steel pipe, wood, paper roll, etc.). In the wind, rain measures, can be used in open air environment.
This series of dual-trolley crane used in the normal environment: the ambient temperature of -20°C ~ +40 ° C, relative humidity ≤ 85%, altitude ≤ 1000 meters.
This series of cranes in the 5 +5 tons, 8 +8 tons, 10 +10 tons, 20 +20 tons, 32 +32 tons, 40 +40 tons, 50 +50 tons and other standards from the weight, 7.5-40 meters Span between.
Weight from the score, such as 50 +50 tons, said the main trolley from the weight of 50 tons, the weight of 50 tons from the trolley; lifting height with the score, such as 14/14 meters, said the main trolley lifting height of 14 meters, Trolley lifting height of 14 meters.


Double trolley lifting EOT crane technical:
According to the severity of the use of this series of cranes are divided into intermediate (A5), heavy (A6) two basic work level, if necessary, can also be light (A1 ~ A3) or overweight (A7 ~ A8) design and manufacturing
The Intermediate work level (A5): motor continuity rate JC = 25%, for less frequent use of occasions, such as paper shop, steel pipe workshop, tower workshop, etc;
Heavy duty level (A6): motor continuity rate JC = 40%, for more frequent applications, such as pipe pile workshop, utility poles and so on.
Heavy duty level crane, the trolley travelling mechanism and the aux hoisting mechanism adopt intermediate duty design.


Order Note:
1, the contract should indicate the weight, span, lifting height, work level, quantity, crane rail model.
2, the same rail there are other specifications of the crane, should indicate the buffer height and related data.
3, crane trolleyts conductive form. Such as angle steel, cable, safety slip line, steel slip line.
4, the crane size and the size of the relevant internal manufacturers. Such as the distance between the crane * high point from the lower chord of the building roof, the size between the lane center and the wall of the plant (or the distance between the edge of the crane and the walls of the plant) and the form and size of the boarding ladder.
5, the product is equipped with the driver room open and closed, can increase the insulation protection or air conditioning facilities (the data listed in the table are indoor crane with the clerk of the data): the basic form of the entrance of the driver room has the left Into the right into the left into the right and into the right, the user or the design unit can choose according to the actual situation, please specify when ordering.
6, when a parameter changes according to user requirements, other data may cause the corresponding changes, please design units and users must pay attention.
7, non-standard products, when ordering must specify the technical requirements.
8, plateau, cold, hot and humid use of the environment, please specify.
9, before leaving the factory, reducer and brake are not fuel, user-owned.
10, the company can be based on user requirements, design and production of non-standard or special bridge crane.
11, the product specifications that are as follows:
QE 150 + 50t-31.5 ~ A6;
QE: double trolley crane bridge crane;
150: the main trolley from the weight of 150t;
50: Deputy trolley from the weight of 50t;
31.5: span 31.5m;
A6: Working duty A6.


Related Products

Inquiry