Single Girder Overhead Crane with Electric Hoist for Workshop

Single Girder Overhead Crane with Electric Hoist for Workshop

Overview: China standard single girder overhead crane is widely used in factory, workshop, warehouse and cargo yard, forbidding to be used in corrosive and explosive places. This model of single girder overhead crane is very popular because of the reliable price and easy maintenance. This crane...

Chat Now

Product Details

2017-5-15-11-39-26.jpg


Overview:

China standard single girder overhead crane is widely used in factory, workshop, warehouse and cargo yard, forbidding to be used in corrosive and explosive places.


This model of single girder overhead crane is very popular because of the reliable price and easy maintenance.

This crane belongs to light duty crane, can be used with single or double speed lifting hoist.  

If the workshop clearance height is limited, the top running type overhead crane is recommended to save the above clearance space and below lifting height.


Working temperature

-25°C ~ +40°C

Lifting capacity

0.25-20 ton

Span length

7.5-32 meters

Lifting height

6-30 meters

Working duty

Class A3

Power

AC 3Ph 380V 50Hz or according to client's requirement

Control mode

Cabin control/remote control/control panel with pendant line

2017-5-15-11-40-58.jpgFeatures:

1.    Weight overload protective device;

2.    Top quality polyurethane buffer;

3.    Crane traveling limit switch and lifting limit switch;

4.    Low voltage protection function;

5.    Emergency stop system;

6.    Laser anti-collision system.

Advantage:

1.    Overload protection: If the material is over the capacity, the crane will give a sharp warning for protection itself.

2.   Emergency brake: If the operation staff encounters some emergency situation, we could start the emergency brake system to protection the related treasure.

3.    Control Method: Room control or remote control to avoid any injure to the operation staff

4.    Main lifting motor: with thermal protection and currency protection.

5.    Hooks with latch;

6.    Rubber buffers;

7.    Protective earthing;

8.    Crane switch and travel end switch;

9.    Sub-assemblies characteristic are tested before assembly.

10.  All cranes must be pre-assmebled and tested before leaving factory and offer the certification of test.


Specification:


ItemSingle Girder Overhead Crane
ModelLD
Span7.5m~28.5m  
Lifting Height6m~30m
Max. Lifting Load20 tons
Rated Lifting Moment400KN
Rated Loading Capacity1t~20t
Working GradeA3/A4
Power Source380V 50HZ 3phase
Working Temperature-25ºC~+40ºC
ColorCustomized
ApplicationMetallurgy, power generation, machinery, mining, port, petrochemical
CertificationISO, CE, SGS
OEM & ODMAccepted

Kindly please provide the following information when sending enquiry to us.

Load capacity

(       )

Tips:1t 2t 3t 5t 10t 15t 20t

Span

(       )

Tips:7.5m-31.5m

Lift height

(       )


voltage

(       )

380V 50Hz AC 3-phase or please note

Working Class

(       )


Hours per day

(       )


Control way

(       )

Tips: remote control, cabin control or pendent control

Please feel free to send us your detailed requirements, you would be satisfied with our service.



Hot Tags: single girder overhead crane with electric hoist for workshop, China, factory, manufacturers, suppliers, made in China
Related Products

Inquiry