Henan Sinoko Cranes Co.,Ltd
Address: Weiqi Road, Crane Industrial Park, Changyuan County, Henan Province, China
Warehouse Traveling 15 ton Monorail Hoist Crane is controled by Pendent line and Remote. Widely used in warehouse material lifting and loading....
LD electric Warehouse Traveling 15 ton Monorail Hoist Crane is composed of girder weld by steel plate andI-beam ,end girder, electric hoist and travelling
mechanism. The electric hoistruns along the lower flange of the I-beam of the girder to accomplish article hoisting. It features
light structure and easy installation and maintenance.
Sketch & Parameters-- Bridge Crane
Detail Show -- Bridge Crane
1) Main Beam--
1. We adopt the Q235 or Q345 steel plate, but if the load is large, we will choose plate with higher steel strength.
2. Single beam main beam U groove without butt weld can eliminate the welding seam of the main beam.
3. Reinforcing plate and bar improve the strength, rigidity & comprehensive carrying capacity of beam
4. Shot-blasting make the steel’s surface rough, eliminate steel material’ s surface oxide skin,and increase products use life and
paint coating quality.
Process of main beam
2) End Carriages --The device feature simple structure, small size, large starting torque, frequent starting, running speed,
low noise, use of safe, reliable, easy to install and maintain, elegant and so on.
3) Electric Hoist—It is small lifting equipment ,featuring small volume, light dead weight, easy operation and convenient use.
It is used for such place as industrial and mining establishment and warehouses and wharfs. It has two main model: CD Model
and MD Model.
Lifting and traveling motor: Nanjin Factory (China top brand)
Metarial of cover and shell: HT200. (High vibration resistance)
Shell of reducer is thicker 2cm than market standart.
Hoist adopt the automatic stoving varnish (enhance film adhesive).
Reducer shall be experienced the Tightness test.
Hoist shall be performed the Dynamic and static, up and down Test, before delivery.
4) Electric System-- Modular design, ease to install and maintain, reliable operation,fuse less circuitry, ducted wiring and
compact terminals. Motor overload protection to prevent overloading.
Crane Traveling Motor
ABM OR SEW (Germany)
Nanjing Factory (China Top1)
Hoist Traveling Motor
Main Electric Components
Quality inspection Dept:
Installation service team:
In order to make a very quick offer and saving your time, it’s better to fill the information below. Copy
and send us the information together with the inquiry.It’s better to send us a drawing,sketch or show us
data and then our engineer can work out a full suitable solution just for you.
Tips:1t 2t 3t 5t 10t 16t 20t 30t
Distance from Hook center to ground
Tips: 380V 50Hz AC 3-phase or please note
Tips:please note the average load
Hours per day
operation frequency each hours, how many hours per day.
Tips: remote control, cabin control or pendent control
Tips:single speed or double speed
Cross &long travel speed
If any special demand, please note.
Rail supply needed
Tips:if yes please note the length
Power supply needed
Your nearest port
Heavy Duty Metallurgical Crane for Lifting The Steel...
High Efficiency Crane Grab for Double Girder Crane
Heavy Duty 100/32-240/80T Metallurgy Overhead Crane ...
Billet Stacking Steel Billet Cranes with Positioning...
16t+16t YC Type Upper Rotation Crane for Steel Mill ...
SWF Brand European Wirerope Electric Hoist 3 Ton 5 t...
With a factory area of 33,000 square meters, construction area of 20,000 square meters, more than 100 sets main production equipments, our production capacity can be 30,000 ton per year.
Copyright © Henan Sinoko Cranes Co.,Ltd All Rights Reserved.