You Are Here:Home > Product > Overhead Crane
Products Categories
Contact Us

Henan Sinoko Cranes Co.,Ltd

Address: Weiqi Road, Crane Industrial Park, Changyuan County, Henan Province, China

Tel: +86-373-3809044

M/P: +86-18790630368

E-mail: inquire@sinokocrane.com

Steel Mill Heavy Duty High Temperature Overhead Crane With C Hook

Overview The metallurgical crane refers to the movement of vertical movement in the direction of the track of the plant, the lateral movement of the trolley and the lifting motion of the hook. It is suitable for metal smelting workshop,which conforms to JB/ t7688.1-95 and JB/ t7688.15-95......

Send InquiryChat Now

Overview

The metallurgical crane refers to the movement of vertical movement in the direction of the track of the plant, the lateral movement of the trolley and the lifting motion of the hook.

It is suitable for metal smelting workshop,which conforms to JB/ t7688.1-95 and JB/ t7688.15-95 standard crane for lifting molten metal.

Metallurgical crane applications generally applies to 10 ℃ to + 50 ℃, environment temperature, the lifting of the molten metal to exercise hook, hook the radiation temperature does not exceed 300 ℃ of bridge crane,suitable for factories and mines,enterprises workshop,warehouse,etc.in indoor or outdoor fixed across intercropping general loading and unloading and lifting transportation work.

The machine is divided into intermediate and heavy duty system according to the busy degree

Intermediate for mechanical processing, metal structure, assembly and other workshops

TIM截图20180423151155.jpg

The weight class is suitable for the refining workshop.The QDY type casting crane adopts the two-beam single car type,the main girder is the box-type structure,the right track,the bridge frame has two main girders and two end beams,and the walking platform and the platform railing.

In the case of air operation,there is an inclined staircase connecting the driver's cab to the main beam,and the insulation layer is set at the bottom of the main beam (if there is a cabin,the insulation layer is also set at the bottom of the cabin).

The lifting trolley is single trolley double hook type.

It is equipped with the main auxiliary hook

The hook head is forged hook (type C hook or W hook).

Main hook can cooperate and work (dumping of liquid metal), have prevent the wire rope off the hook head resistance device,main hoisting mechanism for the motor,single,double brake drum,wire rope with metal core,high temperature resistant,and the products of high safety efficient,ensure the crane lifting the handling of production safety work

This machine is composed of box bridge,LT running mechanism,trolley and electrical equipment.

All the agencies operate indoors.

Work level:A7 and A8


Sketch

轮廓.jpg


Environmental conditions

The design and manufacture of metallurgical crane (hereinafter referred to as crane) shall conform to the relevant provisions of GB3811,this standard and product drawing.

1.1the power supply of the crane is generally three-phase communication with a frequency of 50Hz and a voltage of 380V.

Allowed on motor and electric voltage fluctuation has an upper limit of the rated voltage of + 10%, the lower limit (peak current) to 15% of rated voltage, the crane, the internal voltage loss of the ingot, clamp crane crane,with guide of the whole die slab flip crane crane and not more than 5%,other types of cranes in this standard shall be no more than 4% power if there is any special requirement,can according to user needs,be determined by supply and demand both sides talks things over

1.2the elevation of the crane shall be no more than 2000m.(it shall check the capacity of the motor according to the relevant provisions of GB755 when exceeding 1000m).

1.3working environment temperature and humidity of crane.

at +40℃ temperature relative humidity less than 50%

1.4the site of the crane shall not be flammable, explosive or corrosive gas and shall comply with the relevant standards and documents.

1.5the installation of crane operation rails shall be in accordance with the requirements of GB10183, if any special circumstances may be specified otherwise.


Production Process

201709181854535474010.jpg

201709181849536965479.jpg

Factory

201711141139258435345.jpg


Business Partner

图片4.jpg

图片5.jpg

Hot Tags: steel mill heavy duty high temperature overhead crane with c hook, China, factory, manufacturers, suppliers, made in China
Related Products